FTM Board Club
Evaluation board with STM32H753XI MCU

The STM32H743I-EVAL and STM32H753I-EVAL Evaluation boards (STM32H7x3I-EVAL) are high-end development platforms for the Arm® Cortex®-M7-based STM32H743XI and STM32H753XI microcontrollers, respectively

The STM32H7x3I-EVAL Evaluation boards provide access to all the STM32 peripherals for user applications, and include an embedded ST-LINK debugger/programmer.

The full range of the STM32H7x3I-EVAL hardware features helps develop applications and evaluate all peripherals: USB OTG_HS and FS, Ethernet, FD-CAN, USART, Audio DAC and ADC, digital microphone, SRAM, SDRAM, NOR Flash memory, Twin Quad-SPI Flash memory, microSD 3.0 card, 5.7” 640x480 TFT color LCD with touchscreen, and cryptographic hardware accelerator (available only on STM32H753XI devices) .

The expansion connectors provide an easy way to add specialized features, while ETM trace is supported through external probes.

  • STM32H743XIH6U and STM32H753XIH6U Arm® Cortex® microcontrollers with 2 Mbytes of Flash memory and 1 Mbyte of RAM in TFBGA240+25 package
  • 5.7” 640x480 TFT color LCD with touchscreen
  • Ethernet compliant with IEEE-802.3-2002
  • I2C compatible serial interface
  • RTC with rechargeable backup battery
  • SAI audio DAC
  • ST-MEMS digital microphones
  • 8-Gbyte (or more) SDIO3.0 interface microSD™ card
  • 8 Mx32bit SDRAM, 1 Mx16bit SRAM and 8 Mx16bit NOR Flash memory
  • 1-Gbit Twin Quad-SPI NOR Flash memory
  • Potentiometer
  • 4 color user LEDs
  • Reset, wakeup, tamper or key buttons
  • Joystick with 4-direction control and selector
  • Board connectors
    • Power jack
    • 3 USB interfaces with Micro-AB connector
    • RS-232 communications
    • Ethernet RJ45
    • FDCAN compliant connection
    • Stereo headset jack including analog microphone input
    • 2 audio jacks for external speakers
    • microSD™ card
    • JTAG/SWD and ETM trace
  • Expansion connectors:
    • Extension connectors and memory connectors for daughterboard or wire-wrap board
  • Flexible power-supply options: ST-LINK USB VBUS or external sources
  • On-board debugger/programmer with USB re-enumeration capability, such as mass storage, virtual COM port and debug port:
    • ST-LINK/V2-1 for STM32H7x3I-EVAL
    • STLINK-V3E for STM32H7x3I-EVAL2
  • Comprehensive free software libraries and examples available with the STM32Cube™ Package
  • Support of a wide choice of integrated development environments (IDEs) including IAR™, Keil® and GCC-based IDEs