FTM Board Club
View boards from FTM issue 1711
Issue 1711
Connectivity
View boards from FTM issue 1710
Issue 1710
Embedded & HMI
View boards from FTM issue 1709
Issue 1709
Smart Mobility
View boards from FTM issue 1707
Issue 1707
Industrial Systems
View boards from FTM issue 1706
Issue 1706
Analogue & Sensing
View boards from FTM issue 1705
Issue 1705
Lighting
View boards from FTM issue 1704
Issue 1704
Connectivity
View boards from FTM issue 1703
Issue 1703
Embedded & HMI
View boards from FTM issue 1702
Issue 1702
Power
View boards from FTM issue 1701
Issue 1701
Security & Encryption
Boards featured in FTM 1707
ams
AS5510-WL_EK_DB
Demo Kit for AS5510

The AS5510 demo kit allows you an easy-to-use evaluation of the principle function of the AS5055 linear incremental magnetic position sensor without additional hardware and software effort.

APPLY BUY NOW
Apply for Demo Kit for AS5510 Buy Demo Kit for AS5510
ams
AS5600-SO_RD_ST
Reference Design for AS5600

The reference design AS5600-SO_RD_ST is a contactless potentiometer and allows an easy and fast evaluation of the AS5600 rotary magnetic position sensor in the lab.

APPLY BUY NOW
Apply for Reference Design for AS5600 Buy Reference Design for AS5600
ams
AS5311-TS_EK_AB
Adapterboard for AS5311

The AS5311 adapterboard allows you an easy-to-use evaluation of the principle function of the AS5311 linear incremental magnetic position sensor in your own system design.

APPLY BUY NOW
Apply for Adapterboard for AS5311 Buy Adapterboard for AS5311
ams
AS5047P-TS-EK-AB
Adapterboard for AS5047P

The adapter board allows an easy and fast evaluation of the AS5047P rotary magnetic position sensor in the lab or together with an existing system.

APPLY BUY NOW
Apply for Adapterboard for AS5047P Buy Adapterboard for AS5047P
Cypress Semiconductor
CY8CKIT-042-BLE
Bluetooth® Low Energy Pioneer Kit

 The Bluetooth® Low Energy Pioneer Kit enables customers to evaluate and develop Bluetooth Low Energy projects using the PSoC® 4 BLE and PRoC® BLE devices.

APPLY BUY NOW
Apply for Bluetooth® Low Energy Pioneer Kit Buy Bluetooth® Low Energy Pioneer Kit
Microsemi
VSC7514EV
10-Port L2 Gigabit Ethernet Switch

Microsemi’s next generation switch family delivers a flexible Industrial Ethernet and SMB solution.

APPLY
Apply for 10-Port L2 Gigabit Ethernet Switch
NXP Semiconductors
TWR-SB0800-36EVB
Tower Board - SB0800, Octal Valve/Pump Controller SoC

The TWR-SB0800-36EVB module is a development board illustrating the MC34SB0800 Octal Valve and Pump Controller System on Chip which consists of four low-side drivers regulated/PWM, a high side pre-driver safe switch to protect the valves against short circuit and a high side pre-driver to control a DC motor.

APPLY BUY NOW
Apply for Tower Board - SB0800, Octal Valve/Pump Controller SoC Buy Tower Board - SB0800, Octal Valve/Pump Controller SoC
ON Semiconductor
BB-GEVK
IoT Development Kit Base Board (with WiFi and LCD) Evaluation Board

The Base Board is the host of multiple hardware combination of Shield (Sensor and/or Actuators and Connectivity ) defined for the IoT application hardware implementation. Physical connectors to the shield include Pmod and Arduino format. The base board is also hosting the USB interface to the host PC for Programming the embedded application onto the ARM Cortex M3 Processor, for simple debugging and powering up the application. Additionally the Base board is equipped with a Jtag debug interface to accommodate any complex software debugging tasks.

APPLY BUY NOW
Apply for IoT Development Kit Base Board (with WiFi and LCD) Evaluation Board Buy IoT Development Kit Base Board (with WiFi and LCD) Evaluation Board
ON Semiconductor
CAN-GEVB
CAN (Controller Area Network) Driver Shield Evaluation Board

The CAN Driver Shield Evaluation Board demonstrates the NCV7342 CAN transceiver, an interface between a controller area network (CAN) protocol controller and the physical bus that can be used in both 12 V and 24 V systems and is connected to the IoT through the PCA9655E's 16 bits of General Purpose parallel Input and Output (GPIO) expansion through the I2C-bus and SMBus.

APPLY BUY NOW
Apply for CAN (Controller Area Network) Driver Shield Evaluation Board Buy CAN (Controller Area Network) Driver Shield Evaluation Board
ON Semiconductor
POE-GEVB
Power over Ethernet (PoE) Shield Evaluation Board

The Power over Ethernet (PoE) Shield Evaluation Board demonstrates the NCP1083, a member of the ON Semiconductor high power HIPO™ Power over Ethernet Powered Device (PoE-PD) product family which represents a robust, flexible and highly integrated solution targeting demanding medium and high power Ethernet applications. It combines in a single unit an enhanced PoE-PD interface supporting the IEEE 802.3af and the upcoming draft IEEE 802.3at (D3.0) standard and a flexible and configurable DC-DC converter controller. The NCP1083's exceptional capabilities enable applications to smoothly transition from non-PoE to PoE enabled networks by also supporting power from auxiliary sources such as AC power adapters and battery supplies, eliminating the need for a second switching power supply.

APPLY BUY NOW
Apply for Power over Ethernet (PoE) Shield Evaluation Board Buy Power over Ethernet (PoE) Shield Evaluation Board
ON Semiconductor
PIR-GEVB
PIR (Passive Infrared) Shield Evaluation Board

The PIR Shield Evaluation Board uses the NCS36000, a fully integrated mixed-signal CMOS device designed for low-cost passive infrared controlling applications, with the PCA9655E's 16 bits of General Purpose parallel Input and Output (GPIO) expansion through the I2C-bus and SMBus to create a functional passive infrared sensor evaluation board.

APPLY BUY NOW
Apply for PIR (Passive Infrared) Shield Evaluation Board Buy PIR (Passive Infrared) Shield Evaluation Board
ON Semiconductor
TS-GEVB
Touch Switch Shield Evaluation Board

The touch switch shield evaluation board demonstrates the LC717A00AR which is a high-performance, low-cost capacitance-digital-converter LSI for electrostatic capacitive touch sensor, especially focused on usability. It has 8 channels capacitance-sensor input. The built-in logic circuit can detect the state (ON/OFF) of each input and output the result. This makes it ideal for various switch applications. The calibration function is automatically performed by the built-in logic circuit during power activation or whenever there are environmental changes. In addition, since initial settings of parameters, such as gain, are configured, LC717A00AR can operate in stand-alone mode when the recommended switch pattern is applied. Since LC717A00AR has a serial interface compatible with I2C and SPI bus, the PCA9655E is used to provide 16 bits of General Purpose parallel Input and Output (GPIO) expansion through the I2C-bus and SMBus, detecting outputs of the LC717A00AR's 8-input capacitance data and measuring it as 8-bit data.

APPLY BUY NOW
Apply for Touch Switch Shield Evaluation Board Buy Touch Switch Shield Evaluation Board
ON Semiconductor
ALS-GEVB
Ambient Light Sensor (ALS) Shield Evaluation Board

The NOA1305 ambient light sensor (ALS) is designed for handheld applications and integrates a 16-bit ADC, a 2-wire I2C digital interface, internal clock oscillator and a power down mode. The built in dynamic dark current compensation and precision calibration capability coupled with excellent IR and 50-60 Hz flicker rejection enables highly accurate measurements from very low light levels to full sunlight. The device can support simple count equals lux readings in interrupt-driven or polling modes. The NOA1305 employs proprietary CMOS image sensing technology from ON Semiconductor to provide large signal to noise ratio (SNR) and wide dynamic range (DR) over the entire operating temperature range. The optical filter used with this chip provides a light response similar to that of the human eye.

APPLY BUY NOW
Apply for Ambient Light Sensor (ALS) Shield Evaluation Board Buy Ambient Light Sensor (ALS) Shield Evaluation Board
ON Semiconductor
D-STPR-GEVK
Dual Stepper Motor Driver Shield Evaluation Board

The Dual Stepper Motor Driver Shield Evaluation Board evaluates the AMIS30543, a micro-stepping stepper motor driver for bipolar stepper motors. It has an on chip voltage regulator, reset output and watchdog reset able to supply peripheral devices. The chip is connected through IO pins and a SPI interface with an external microcontroller that is regulated through the PCA9655E's 16 bits of General Purpose parallel Input and Output (GPIO) expansion.

APPLY BUY NOW
Apply for Dual Stepper Motor Driver Shield Evaluation Board Buy Dual Stepper Motor Driver Shield Evaluation Board
ON Semiconductor
BLDC-GEVK
BLDC Motor Driver Shield Evaluation Kit

The BLDC-GEVK evaluates the LV8907, a high performance, sensor-less three-phase BLDC motor controller with integrated gate drivers for driving external N-MOSFETs. An on-chip two-stage charge pump provides required gate current for a wide range of ultra low RDS(ON) type external N-MOSFETs. The device offers a rich set of system protection and diagnostic functions such as over-current, over-voltage, short-circuit, under-voltage, over-temperature and many more. It supports open-loop as well as closed-loop speed control with user configurable startup, speed setting and proportional/integral (PI) control coefficients, making it suitable for a wide range of motor and load combinations. With an in-built linear regulator for powering an external circuit, a watchdog timer and a Local Interconnect Network (LIN) transceiver, the LV8907 offers the smallest system solution footprint. An SPI interface is provided for parameter setting and monitoring the system health and utilized through the PCA9655E's 16 bits of General Purpose parallel Input and Output (GPIO) expansion.

APPLY BUY NOW
Apply for BLDC Motor Driver Shield Evaluation Kit Buy BLDC Motor Driver Shield Evaluation Kit
ON Semiconductor
SIGFOX-GEVB
SIGFOX Shield Evaluation Board

The SIGFOX shield evaluation board demonstrates the AX-SFEU, a single chip solution to create an ultra low power consumption node on the Sigfox network for Internet of Things applications.

APPLY BUY NOW
Apply for SIGFOX Shield Evaluation Board Buy SIGFOX Shield Evaluation Board
STMicroelectronics
X-NUCLEO-IHM13A1
Low voltage brush DC motor driver expansion board for STM32 Nucleo based on the STSPIN250

The X-NUCLEO-IHM13A1 expansion board for STM32 Nucleo is based on the STSPIN250 low voltage brush DC motor driver.

APPLY
Apply for Low voltage brush DC motor driver expansion board for STM32 Nucleo based on the STSPIN250
STMicroelectronics
STEVAL-SPIN3201
Advanced BLDC controller with embedded STM32 MCU evaluation board

The STEVAL-SPIN3201 board is a three-phase brushless DC motor driver board based on the STSPIN32F0 and STD140N6F7 MOSFETs.

 

 

APPLY
Apply for Advanced BLDC controller with embedded STM32 MCU evaluation board