FTM Board Club
PAN1780 Evaluation Kit

Two PAN1780 USB-Evaluation Boards packed in a case. The PAN1780 Daughterboard enables quick prototyping and Software Testing.


Click here for the ENW89854AXKF Dongle

The PAN1780 is a Bluetooth® 5.0 Low Energy Module based on the Nordic nRF52840 single-chip controller. The Bluetooth 5.0 features enable a higher symbol rate of 2 Mbps using the high-speed LE 2M PHY. Furthermore, the new LE advertising extensions allow for much larger amounts of data to be broadcasted in connectionless scenarios. Besides Bluetooth 5.0 with the qualified Bluetooth mesh profile stack it supports 802.15.4 and NFC-A. With its Cortex™ M4F processor, 256kB RAM and the build-in 1MB flash memory it can easily be used in standalone mode, thereby eliminating the need for an external processor, saving complexity, space and cost.

  • Surface mount type dimensions: 15.6 mm x 8.7 mm x 2 mm
  • Same form factor as PAN1026A and PAN1762 but smaller pitch and more pins
  • Nordic nRF52840 featuring ARM Cortex-M4F with 64 MHz
  • Bluetooth 5 LE including LE 2M and LE Coded PHY
  • Embedded 1 MB flash memory and 256 kB internal RAM
  • Includes ARM TrustZone CryptoCell 310 and supports secure boot including Root of Trust (RoT)
  • Up to 48 General Purpose I/Os (GPIO), which are shared by up to 4 SPI, 2 I˛C, 2 UART, 4 PWM, 8 ADC, 1 NFC-A, 32kHZ IN/OUT, nRESET
  • USB 2.0 full-speed device interface
  • Built-in temperature sensor