The EVBUM2926/D evaluation board features a solid state circuit breaker (SSCB) application with a silicon carbide (SiC) Combo JFET in a TOLL package. Included with the board are schematics, PCB layout, interface definition, test procedure and bill of material.
This evaluation board features TO-247-4L type power software for NCP51152BADR2G and NCP51152CADR2G gate drivers.
The NCPV51152 isolated single-channel gate driver features 4.5A source and 9A sink current. The gate drive is designed for fast switching to drive power MOSFETs, and SiC MOSFET power switches.
Short and matched propagation delays are offered. The NCP51152xA provides a split output that controls the rise and fall times individually. The NCP51152xB has the UVLO of the common collector voltage referenced to GND2 to get a true UVLO.
The NCP51152 is available in a 4mm SOIC-8 package and can support isolation voltage up to 3.75kVrms. Another important protection function is independent under-voltage lockout for both-side driver.
The NCN26010XMNEVK from onsemi demonstrates the basic functionality of the NCN26010 Ethernet controller and transceiver, and doubles as a laboratory tool to allow engineers to develop embedded software drivers for the NCN26010 device.
The evaluation kit consists of the NCN26010BMNEVB bridge board and the NCN26010XMNEVB 10BASE-T1S evaluation board.
