Consumer

Microchip

The EV99F34A evaluation board from Microchip is based on its PD77718 power-over-Ethernet (PoE) manager and PD77010 PoE controller. 

 

Operating in controller mode using the PD77010, the EV99F34A board demonstrates eight IEEE 802.3bt 2-pair ports using the PD77718T3, and eight IEEE 802.3bt 4-pair ports using two PD77718T4 devices. The evaluation system provides designers with a suitable environment for evaluating the performance and implementation of these PoE managers and controller. The firmware supplied by Microchip supports both 4-pair and 2-pair operation. 

Key features: 

  • IEEE 802.3af/at/bt Type 4 standard compliant
  • Switch-domain USB-C® interface to be connected to a PC with Microchip GUI
  • PoE controller manual reset and disable ports
  • LED status indication for all ports 
  • Single power source 
  • Operating-temperature range: 0°C to 40°C
Renesas

The RZ/G3E Evaluation Board Kit from Renesas, which consists of a system-on-module (SOM) board and a carrier board, is ideal for evaluating the features of the 64-bit RZ/G3E microprocessor. The module board is compatible with the SMARC v2.1 standard, and provides a reference design basis for module-based product development.

The SOM includes:

  • 4 Gbytes of LPDDR4x SDRAM
  • 16 Mbytes of QSPI Flash memory
  • 64 Gbytes of eMMC memory
  • Two MicroSD slots 
  • Parallel interface
  • I3C connector
  • JTAG connector
  • 8-channel ADC 
  • Current monitor
STMicroelectronics

The B-WBA5M-WPAN STM32WBA connectivity expansion board from STMicroelectronics provides a flexible way to evaluate the STM32WBA5MMGH6 module.

The board includes a USB Type-C® connector for power only. It also integrates an M.2 E‑Key connector, turning it into an M.2 E‑Key daughterboard which provides a Bluetooth® interface to a host board that has an M.2 E‑Key host connector. The M.2 E‑Key connector is compatible with the PCI-SIG standard, and provides UART, SPI, I2C, and SAI interfaces for communication with the host.

The B-WBA5M-WPAN board is supported by the STM32CubeWBA software package. 

 

Key features include: 

  • 256 kbit serial EEPROM
  • Accurate MEMS temperature sensor
  • 3D accelerometer and 3D gyroscope
  • User LED
  • User and reset push buttons
Microchip

The ATA6847 evaluation board provides a fully assembled hardware platform for evaluating and demonstrating the motor drive capabilities of the ATA6847 gate driver system basis chip (SBC) from Microchip.

Allegro Microsystems

Allegro MicroSystems evaluation boards simplify the evaluation process for its tunnel magnetoresistance (TMR) current sensors. The boards provide test points for convenient access to device pins, allowing for quick measurement and validation without the need for complex test set-ups. 

STMicroelectronics

STEVAL-OET005 kits provides a hardware platform for evaluating the ECMF4-40A100N10 and other STMicroelectronics ESD protection or filtering devices for USB Type-C® connectors.

1 … 7 8 9 10 11 … 33