Lighting

Microchip

The PIC32CM PL10 Curiosity Nano Evaluation kit (EV10P22A) contains the PIC32CM PL10 microcontroller with full programming and debugging capabilities. The board features a USB Type-C® connector for power and data, adjustable target voltage, and compatibility with Curiosity Nano baseboards. Hardware peripherals include a user LED, mechanical switch, and a capacitive touch button.

The board is supported by MPLAB® Tools for VS Code® and MPLAB Harmony.

Power Integrations

The RDR-1016 reference design board from Power Integrations implements a flyback converter which provides a dual isolated output voltage of 12V at 2A, and 5V at 500mA, from a wide input-voltage range of 85V to 265V ac. The power supply is based on the TNY5073K flyback converter, a member of the TinySwitch-5 family of ICs. 

The board achieves peak efficiency of at least 87% at full load with a 230V ac input. Average efficiency across the load range is at least 85%. 

The RDR-1016 conforms to the requirements of the CISPR22B/EN55022B standards for conducted EMI emissions. It is specified for operation at an ambient-temperature range of 0°C to 40°C with free-air convection cooling.

STMicroelectronics

The STEVAL-MKI207V1 is an adapter board designed to facilitate the evaluation of the ISM330DHCX inertial measurement unit (IMU) for industrial applications in the MEMS product portfolio. The board offers an effective solution for fast system prototyping and device evaluation directly within the user’s own application.

The STEVAL-MKI207V1 can be plugged into a standard DIL24 socket. The adapter provides the complete ISM330DHCX pinout and comes ready to use with the required decoupling capacitors on the VDD power supply line. This adapter is supported by the STEVAL-MKI109D evaluation platform with a high-performance 32-bit microcontroller functioning as a bridge between the sensor and a PC, on which it is possible to use the downloadable MEMS Studio graphical user interface or dedicated software routines for customized applications.

  • Complete ISM330DHCX pinout for a standard DIL24 socket
  • Fully compatible with the STEVAL-MKI109D evaluation platform
Microchip

Digital power plug-in module (DP PIM) demo board for dsPIC33AK digital signal controllers

The dsPIC33AK512MPS506 Digital Power Plug-In Module (DP PIM) is compatible with a range of power boards to demonstrate the dsPIC33AK512MPS506 digital signal controller (DSC).

The demonstration board directly plugs into the DM330029 digital power development board, the DV330101 low-power FPC development kit, and the EV84C64A interleaved LLC converter development board.

The DP PIM accesses the dsPIC33AK512 analog inputs, the digital-to-analog converter (DAC) output, the pulse-width modulator (PWM) outputs and the general-purpose input and output (GPIO) ports. 

 

  • dsPIC33AK512MPS506 32-bit digital signal controller in 64-pin TQFP package
  • ICSP™ programming header
  • On-board LDO with Power Good (PG) function
  • MCP2221A USB to UART/I2C serial converter
  • USB Type C connector
  • Board edge connection interface for analog inputs/outputs, PWM outputs and GPIO ports.
  • Analog input with op amp buffer via test point loop connector, can be used for Bode plot measurements
  • Support for complete dsPIC33AK512MPS506 DSC family
STMicroelectronics

The B-WBA5M-WPAN STM32WBA connectivity expansion board from STMicroelectronics provides a flexible way to evaluate the STM32WBA5MMGH6 module.

The board includes a USB Type-C® connector for power only. It also integrates an M.2 E‑Key connector, turning it into an M.2 E‑Key daughterboard which provides a Bluetooth® interface to a host board that has an M.2 E‑Key host connector. The M.2 E‑Key connector is compatible with the PCI-SIG standard, and provides UART, SPI, I2C, and SAI interfaces for communication with the host.

The B-WBA5M-WPAN board is supported by the STM32CubeWBA software package. 

 

Key features include: 

  • 256 kbit serial EEPROM
  • Accurate MEMS temperature sensor
  • 3D accelerometer and 3D gyroscope
  • User LED
  • User and reset push buttons
Renesas

The Bluetooth Low Energy Development Kit Pro for the DA14533 SmartBond TINY automotive system-on-chip (SoC) from Renesas includes a motherboard, daughterboard, and cables. It is the ideal platform for evaluating the performance of the small, low-power DA14533 in applications such as tire pressure monitoring and passive keyless entry. 

The kit provides users with the following capabilities:

  • Software development
  • Programming the DA14533 via JTAG or UART using the DA1453x software development kit supplied by Renesas
  • RF characterization
  • Hardware prototyping
  • Power measurement
  • 2 x auxiliary voltage/current measurement
  • Monitoring eight digital inputs 
  • Connecting MikroBUS™ modules
1 2 3 … 7