Security

STMicroelectronics

The STM32 Nucleo-144 board for the STMicroelectronics STM32U3C5 series of microcontrollers provides an affordable and flexible way for users to try new concepts and build prototypes.

The new STM32U3C5 series implements cutting-edge power-saving innovations, easing the deployment of battery-powered embedded devices, especially in remote locations.

These latest MCUs are aimed at IoT devices that operate for extended periods without maintenance and with the limited energy from a coin cell or ambient solar or thermoelectric source. The MCUs take advantage of innovative techniques such as near-threshold design to cut dynamic power consumption.

The NUCLEO-U3C5ZI-Q board offers Arduino Uno V3 connectivity support. ST morpho headers allow easy expansion of the functionality of the STM32 Nucleo open development platform with a wide choice of specialized shields.

The STM32 Nucleo-144 board does not require any separate probe as it integrates the ST-LINK debugger/programmer, and is supplied with comprehensive, free STM32 software libraries and examples available with the STM32Cube MCU package.

onsemi

The prototype AR0822 8MP Premier Reference Image Sensor Module (PRISM) offers standardized connectors, layout configuration and the one-time programmable memory (OTPM) protocol.

The module supports the 8MP AR0822 image sensor which uses embedded high-dynamic range (eHDR) to capture continuous 4K video and single frames. The eHDR features intelligent on-chip linearization which enables the AR0822 to reach 120db, and to reduce motion artifacts and mitigate LED flicker.

Typical applications for the AR0822 image sensor include security, drones, robotics, and vehicle dashboard cameras.

STMicroelectronics

The X-NUCLEO-ESE02A1 from STMicroelectronics includes a pre-personalized STSAFE-L010 secure element, allowing engineers to start host authentication, counter handling, and secure data-storage experiments without first setting up a personalization process.

The expansion board uses an Arduino interface, making it compatible with STM32 Nucleo development boards. This helps developers connect the secure element to an STM32 host and build proof-of-concept code for peripheral or consumable authentication

Software support includes the X-CUBE-STSE01 expansion package and the STSELib repository. These resources help engineers integrate STSAFE-L010 functions into embedded applications, including authentication flows and secure data-management services.

STMicroelectronics

The X-NUCLEO-NFC12A1 from STMicroelectronics provides an STM32 Nucleo expansion board for evaluating the ST25R300 NFC reader in card-reader, host card-emulation, and NFC charging applications. The expansion board supports all five NFC Forum tag types in reader mode. It supports ISO/IEC 14443 type A/B, ISO/IEC 15693 single-subcarrier, and ISO/IEC 18092 communication protocols.

The board has an Arduino UNO R3 connector, six general-purpose LEDs, and a firmware library compatible with STM32Cube. Sample firmware for the ST25R300 helps engineers to start development on STM32 Nucleo host boards.

STMicroelectronics

The SC-KTPM-RASPIKJ1 from STMicroelectronics is a version of the STPM4RasPIV21 extension board supplied with an ST33KTPM2X32DKJ1 TPM soldered. The board connects ST33KTPM family members to Raspberry Pi® and STM32 microprocessor development kits, including the STM32MP157F-DK2 and STM32MP135F-DK.

The SC-KTPM-RASPIKJ1 provides a 26-pin female connector for connection to Raspberry Pi or STM32MPx-DK hardware. The board supports I²C or SPI interface configuration. A TPM reset button allows engineers to reset the TPM without restarting the host platform, while signal marking on the PCB simplifies measurement and debugging.

Infineon

The evaluation kit for the AIROC™ CYW55913 Wi-Fi® and Bluetooth® Low Energy (LE) connected MCU enables evaluation, prototyping, and development of CYW55913, in addition to the CYW55912 and CYW55911, for a wide array of applications for the Internet of Things.

1 2 3 4 … 13