FTM 26-vi development boards

The RA0E3 Fast Prototyping Board features the RA0E3 MCU and provides a streamlined evaluation board for evaluating and developing prototypes across a wide range of applications. It includes a built‑in SEGGER J-Link™ emulator, enabling easy programming and debugging without requiring additional hardware.

Designed for flexibility, the board offers standard Arduino Uno and Pmod™ interfaces, plus through‑hole access to all MCU pins for expanded connectivity.

Sample software is available to help you quickly evaluate RA0E3 MCU functionality and integrate the board with wireless modules, sensor add‑ons, and other peripherals.

The X-NUCLEO-53L4A3 from STMicroelectronics is an expansion board for any STM32 Nucleo board equipped with Arduino R3 connectors which enables designers to develop applications using the VL53L4ED short-range time-of-flight (ToF) proximity sensor.

The expansion board is supplied with a cover glass holder in which designers can fit a spacer of 0.25 mm, 0.5 mm, and 1 mm height below the cover glass to simulate a variety of air gaps. A small oval cover glass fitting the sensor is included.

The kit includes:

• Two different cover glass units to protect the sensor from dust
• Compatible with STM32 Nucleo development boards
• Equipped with Arduino^® UNO R3 connectors
• Full system software, including code examples and a graphical user interface

The X-NUCLEO-IKS5A1 integrates five sensors covering distinct measurement domains, bringing them into a single timing domain to simplify multi-sensor alignment and to support applications that require coherent motion, vibration, and environmental data. The solution includes:

• ISM6GH256X intelligent IMU for simultaneous measurement of low-g and high-g acceleration 
• ISM330IS six-axis IMU with always-on accelerometer and gyroscope 
• IIS2DULPX ultra-low-power accelerometer
• ILPS22QS barometer with 1260hPa and 4060hPa ranges
• IIS2MDC three-axis magnetometer 

The platform makes these industrial sensors accessible to developers using an STM32 microcontroller through its Nucleo-compatible interface and the ST software ecosystem. Onboard features such as sensor hub support, finite state machines, and machine learning cores allow initial data processing directly at the sensor, reducing the computation workload on the host processor. The ST MEMS-Studio and X-CUBE-MEMS1 software support configuration, acquisition control, and parameter visualization for simplified development and analysis.

Detachable add-on modules provide additional connectors, and support distributed sensing layouts for either the STEVAL-MKGI07A microcontroller board or the main X-NUCLEO-IND5A1 board.

The STEVAL-MKI247A is an adapter board designed to facilitate the evaluation of the 

LSM6DSV80X 6-axis inertial measurement unit (IMU). The board offers an effective solution for fast system prototyping and device evaluation directly within the user’s own application. The STEVAL-MKI247A adapter board exposes the complete LSM6DSV80X pinout in a standard DIL 24 format and supports fast evaluation with the STEVAL-MKI109D platform and MEMS Studio software.

The BMM350 Shuttle Board provides access to the pins on the BMM350 magnetometer via a simple socket, for convenient application development. It can be directly plugged into Bosch Sensortec’s Application Board 3.0.

The STEVAL-MKI252KA evaluation kit is based on the IIS3DWBG1, ultrawide bandwidth, low-noise 3-axis digital vibration sensor with extended temperature range.

The evaluation kit includes a square sensing board with the IIS3DWBG1 mounted at the center, connected by flat cable to the STEVAL-MKIGIBV5 adapter board for compatibility with the STEVAL-MKI109D platform. The kit exposes the complete pinout and supports sensor configuration and communication through ST MEMS Studio.

The CY8CPROTO-041TP is a plug-and-play prototyping kit for evaluating the PSoC™ 4100T Plus MCU and its fifth-generation CAPSENSE and Multi-Sense capabilities. The control board carries the MCU, an onboard KitProg3 programmer/debugger, and an ambient light sensor for ADC evaluation. Two peripheral boards provide access to a self-capacitive button, a mutual-capacitive button, a 4×5 capacitive touchpad supporting multi-touch, gesture recognition, and liquid tolerance, and a proximity sensor integrated as a loop antenna around the touchpad. With 52 GPIOs accessible via through-hole connections, compatibility with CY8CPROTO-040T-MS expansion boards for inductive and liquid level sensing, and full ModusToolbox software support, the kit covers the full range of Multi-Sense evaluation from a single platform.

The PIC32CM GC00 Curiosity Pro is a Microchip Technology development board featuring a 72MHz Arm® Cortex®-M23 microcontroller, requiring no additional hardware to get started.

The development board is designed to make it easy to prototype and evaluate applications based on the PIC32CM SG00/GC00 microcontroller family. The board comes ready to use out of the box, with an integrated MPLAB PICkit On-Board 4 debugger handling programming and real-time debugging over a single USB connection. Expansion options are plentiful, with Arduino UNO R3, mikroBUS, and Xplained Pro extension headers all present, making it straightforward to connect shields, click boards, and Microchip expansion boards. A solid set of onboard peripherals includes dual CAN transceivers, a precision voltage reference, touch and tactile buttons, user LEDs, and a potentiometer. This variety means there is plenty to work with before reaching for any expansion hardware at all.