Infineon

Infineon

The automotive door control reference design brings together components from the MOTIX™ low-voltage motor control and OptiMOS™ power MOSFET families with a TRAVEO™ II microcontroller into a design which is optimized for thermal and EMC performance.

 

  • TRAVEO™ II microcontroller
  • TLE9166EQ half-bridge drivers with integrated MOSFETs and high-side switches
  • BTM90x1 integrated H-bridges
  • TLE9562 multifunctional system basis chip (SBC) for brushed dc (BDC) motor control
  • PROFET™ BTS7200 smart high-side switch
  • Bridge with OptiMOS™ 7 power MOSFETs
  • Controller area network (CAN)
  • Local interconnect network (LIN)
Infineon

Start development of the CY15B104QSN, 4Mbit 3.0V EXCELON™ F-RAM with the EVAL-CY15B104QSN evaluation board. This board supports SPI, dual SPI and quad SPI, connects to any microcontroller or SoC, and is Pmod compatible.

The software ecosystem is the AURIX™ Development Studio, ModusToolbox™.

Infineon

The TRAVEO™ T2G Cluster 6M Lite evaluation kit supports assessment of the CYT4DN TRAVEO™ T2G microcontrollers and features an HDMI interface for high-resolution FPD-LINK video output, and has onboard EZ-USB™ FX3 and Ethernet PHY

The CYUSB3014-BZXC converts the RGB display signals into USB packets, and the RGB frames can then be viewed by running a media player application on a PC.

The kit also features three user LEDs, one potentiometer, two user push buttons, a MIPI-CSI2 connector, and two Type-C connectors, in addition to external SEMPER™ Flash and HYPERRAM™ memories. To support program and debug, the kit has onboard KitProg3.

Infineon

The REF-MINI-CMFRT-SIP is a compact Infineon automotive motor-control reference design for 100W brushless direct current (BLDC) comfort applications, using the MOTIX™ TLE9954QSW40-33 System-in-Package (SiP), OptiMOS™ 7 MOSFET technology and XENSIV™ tunnel magnetoresistance (TMR) current sensing.

Infineon

The CY8CPROTO-041TP is a plug-and-play prototyping kit for evaluating the PSoC™ 4100T Plus MCU and its fifth-generation CAPSENSE and Multi-Sense capabilities. The control board carries the MCU, an onboard KitProg3 programmer/debugger, and an ambient light sensor for ADC evaluation. Two peripheral boards provide access to a self-capacitive button, a mutual-capacitive button, a 4×5 capacitive touchpad supporting multi-touch, gesture recognition, and liquid tolerance, and a proximity sensor integrated as a loop antenna around the touchpad. With 52 GPIOs accessible via through-hole connections, compatibility with CY8CPROTO-040T-MS expansion boards for inductive and liquid level sensing, and full ModusToolbox software support, the kit covers the full range of Multi-Sense evaluation from a single platform.

1 2 3 … 12