Automotive

Microchip

The dsPIC33CK Curiosity Development Board is a cost-effective development and demonstration platform for the dsPIC33CK family of single-core digital signal controllers.

The board takes advantage of the Microchip MPLAB® X integrated development environment. It includes an integrated programmer/debugger and requires no additional hardware, making it a good starting point for exploring the dsPIC33C family.

Microchip

The AT88CKSCKTUDFN-XPRO is a Microchip XPRO extension kit for Microchip CryptoAuthentication™ devices that are supplied in an 8-pin UDFN package. The board attaches to any Microchip microcontroller board that supports the XPRO interface. 

The boards operate with the following Microchip devices:

  • ATECC108A/508A/608A – elliptic curve security devices with I2C or single-wire interface
  • ECC204 – elliptic curve security device with with I2C or single-wire interface
  • TA010 – automotive-grade elliptic curve security device with I2C or single-wire interface
  • ATSHA204A – symmetric security device with I2C or single-wire interface
  • SHA104 – symmetric security device with I2C or single-wire interface, for client-side applications
  • SHA105 – symmetric security device with I2C interface, for host-side applications
  • ATAES132A – secure memory device with I2C or SPI interface

The boards can be used as a learning tool, a development tool, or for configuring and provisioning devices in limited quantities.

onsemi

The AR0822NPSC10SMEAH3-GEVB sensor board for the 8Mpixel AR0822 image sensor provides a convenient platform for evaluating the image sensor’s embedded high dynamic range (HDR) feature and its low power consumption.

The board can be interfaced to the onsemi Demo 3 evaluation board, or to the AP1302 evaluation board stacked on the Demo 3 board. The combined kit uses the DevSuite/DevWareX software from onsemi to configure the system. The software provides a comprehensive set-up interface, and offers a flexible way to evaluate the sensor’s features and capabilities.

 The sensor board comes with a lens suitable for evaluation. Designers can use their own lens as long as it is compatible with the mechanical and optical requirements of the sensor.

Monolithic Power Systems

The EVQ1923-RE-00A evaluation board demonstrates the capabilities of the MPQ1923-AEC1, a high-frequency half-bridge gate driver that has a voltage rating of 100 V. The MPQ1923-AEC1 is intended for use in motor drivers, and in other power-control applications in telecoms servers, and avionics and industrial equipment. 

The EVQ1923-RE-00A is configured as a buck converter.

STMicroelectronics

The EVSPIN32F0601S3 motor control board is fully compatible with ST’s X-CUBE-MCSDK motor-control software development kit. These tools simplify development of drives which implement single- or three-shunt control.

1 … 7 8 9 10 11