Industrial

STMicroelectronics

The STEVAL-MKI245KA demonstration kit from STMicroelectronics consists of an ISM330 motion sensor board, which is connected through flat cable to an STEVAL-MKIGI06A generic adapter board to make it compatible with the STEVAL-MKI109V3 motherboard. 

The STEVAL-MKIGI06A can be plugged into a standard DIL 24 socket. The kit provides access to the complete ISM330BX pinout and is supplied with the required decoupling capacitors on the power supply lines.

The STEVAL-MKI109V3 motherboard includes a high-performance 32-bit microcontroller functioning as a bridge between the sensor and a PC, on which it is possible to use the downloadable MEMS-Studio graphical user interface, or dedicated software routines for customized applications.

STMicroelectronics

The STEVAL-PROTEUS1 from STMicroelectronics is an evaluation tool designed for temperature and vibration monitoring. It is based on a 2.4 GHz multi-protocol wireless system-on-chip (SoC) which is suitable for performing condition monitoring in industrial applications.

The evaluation board simplifies the prototyping, evaluation and development of wireless industrial sensor nodes used in predictive maintenance. All components are mounted on the top side of the PCB to provide for easy mounting on other equipment. Comprehensive software and firmware libraries implementing vibration analysis in the time and frequency domains ease software customization and shorten time-to-market.

The main board includes the STM32WB5MMG ultra-low power wireless radio module. This module is FCC and IC certified. Based on the STM32WB55VGY wireless SoC, it complies with the requirements of the Bluetooth® Low Energy SIG specification v5.2, ZigBee 3.0, and IEEE 802.15.4-2011. The main board includes an STSAFE-A110 secure element which provides authentication and secure data management services to a local or remote host.

The board also features an IIS3DWB high-bandwidth accelerometer, IIS2DLPC ultra-low power accelerometer, and the ISM330DHCX inertial motion sensing module for vibration monitoring.

An external memory is connected via QSPI to the STM32WB5MMG module for data buffering and event storage.

The STEVAL-PROTEUS board may be powered by the lithium polymer rechargeable battery. It can also be powered via USB, 5 V at 500 mA, or a primary battery which is not included.

Application example firmware with dedicated algorithms is preloaded in the STM32WB5MMG Flash memory for easy demonstration of wireless vibration and temperature node monitoring.

Infineon

The OPTIGA™ Authenticate NBT development kit from Infineon is ideal for the quick and simple evaluation of the OPTIGA Authenticate NBT using example applications available through GitHub. These example applications include code for smartphones based on the Android™ or iOS operating systems.

The kit simplifies the development of custom applications using a PSOC™ host microcontroller based on the example applications. After detaching the adaptor board, the shield may also be used separately for evaluation and application development using other MCU boards.

STMicroelectronics

The STM32H7S78-DK Discovery Kit from STMicroelectronics is a complete demonstration and development platform for the Arm® Cortex®‑M7 core‑based STM32H7S series of microcontrollers.

The STM32H7S78-DK Discovery Kit includes a full range of hardware features which help the user to evaluate many peripherals, such as USB Type-C®, Octo‑SPI Flash memory and Hexadeca‑SPI PSRAM devices, audio codec, digital microphones, ADC, flexible extension connectors, and a user button. The four flexible extension connectors give easy expansion capabilities for applications such as wireless connectivity and sensors.

The STM32H7S7L8H6H MCU features three I2C buses, six SPI ports, three USART ports, two SDMMC ports, two CAN ports, an Ethernet port, two SAI ports, two 12‑bit ADCs, an embedded step-down converter, two Octo‑SPI memory interfaces, one Hexadeca‑SPI interface, USB OTG HS port with power delivery, LCD‑TFT controller, flexible memory controller, an 8‑ to 14‑bit DCMI interface, JTAG, and SWD debugging support.

The kit integrates an STLINK-V3EC embedded in-circuit debugger and programmer for the STM32 MCUs with a USB Virtual COM port bridge. It is supplied with the comprehensive STM32 MCU software package.

Renesas

This evaluation board kit is ideal for evaluating RZ/G3S. The RZ/G3S Evaluation Board Kit consists of a module board (SOM) and a carrier board. The module board complies with the SMARC v2.1 standard.

Infineon

The KIT_XMC48_RLX_ECAT_V2.1 EtherCAT® evaluation kit from Infineon supports development based on the XMC4800, an Arm® Cortex®-M4 core-based microcontroller which includes an EtherCAT slave node. 

The Infineon ModusToolbox™ software supports application development on the evaluation kit by providing a board support package and validated code examples.

1 … 19 20 21 22 23 … 47