Industrial
The Nexperia NEVB-MCTRL-100 BLDC motor driver kit provides a full motor drive solution for 12 V to 48 V, three-phase brushless dc (BLDC) motors.
The kit features PCBs designed for the Nexperia NextPower MOSFET family housed in an LFPAK56 package, and the modular design allows for different motor controllers, gate drivers, MOSFETs and motors to be used. In addition, each board provides convenient test points for power, motor drive, and sensing signals to aid with development and testing with the Nexperia LFPAK56 MOSFET family.
The motor controller board is compatible with the Leonardo R3 and Nucleo development board form factors.
The EVLSTGAP3S6S is a half-bridge evaluation board for evaluating the STGAP3S6S isolated single gate driver from STMicroelectronics.
The STGAP3S6S features a maximum 6 A current capability, rail-to-rail outputs, and optimized under-voltage lockout and desaturation protection thresholds for silicon carbide (SiC) MOSFETS. It is ideal for use in high-power industrial motor drivers.
The gate driver has a single Output pin and a driver line for an external Miller clamp N-channel MOSFET: this optimizes the suppression of positive and negative gate spikes during fast commutations in half-bridge topologies.
Device protection features are connected to the recommended network on the board and can be easily evaluated through the board test points. Dual Input pins allow the selection of signal-polarity control and hardware interlocking protection to avoid cross-conduction in case of controller malfunction.
The gate driver allows negative gate driving, and the onboard isolated dc-dc converters provide an optimized drive voltage for SiC MOSFETs.
The KIT_PSC3M5_EVK is an evaluation board for the Infineon PSOC™ Control C3 family of microcontrollers.
The kit features PSOC Control C3M5, a high-performance and low-power single-core Arm® Cortex® M33-based MCU intended for use in motor-control applications. In addition to the CPU subsystem, the chip contains advanced real-time control peripherals, such as a high-performance programmable analog subsystem, comparators, advanced timers with high-resolution capability, up to six serial communication blocks, and two CAN FD interfaces for system communication.