Telecomms

onsemi

This evaluation board features TO-247-4L type power software for NCP51152BADR2G and  NCP51152CADR2G gate drivers.

The NCPV51152 isolated single-channel gate driver features 4.5A source and 9A sink current. The gate drive is designed for fast switching to drive power MOSFETs, and SiC MOSFET power switches. 

Short and matched propagation delays are offered. The NCP51152xA provides a split output that controls the rise and fall times individually. The NCP51152xB has the UVLO of the common collector voltage referenced to GND2 to get a true UVLO.

The NCP51152 is available in a 4mm SOIC-8 package and can support isolation voltage up to 3.75kVrms. Another important protection function is independent under-voltage lockout for both-side driver.

STMicroelectronics

The STEVAL-MKI251A is an adapter board designed to facilitate the evaluation of the LSM6DSV320X 6-axis inertial measurement unit (IMU).

The board offers an effective solution for fast system prototyping and device evaluation directly within the user’s own application.

The STEVAL-MKI251A can be plugged into a standard DIL 24 socket. The adapter provides the complete LSM6DSV320X pinout and comes ready-to-use with the required decoupling capacitors on the VDD power supply line.

This adapter is supported by the STEVAL-MKI109D evaluation platform. This includes a high-performance 32-bit microcontroller functioning as a bridge between the sensor and a PC, on which it is possible to use the downloadable MEMS Studio graphical user interface, or dedicated software routines for customized applications.

The adapter board can be also plugged in other boards such as STEVAL-MKBOXPRO and X-NUCLEO-IKS4A1.

STMicroelectronics

The STEVAL-MKI207V1 is an adapter board designed to facilitate the evaluation of the ISM330DHCX inertial measurement unit (IMU) for industrial applications in the MEMS product portfolio. The board offers an effective solution for fast system prototyping and device evaluation directly within the user’s own application.

The STEVAL-MKI207V1 can be plugged into a standard DIL24 socket. The adapter provides the complete ISM330DHCX pinout and comes ready to use with the required decoupling capacitors on the VDD power supply line. This adapter is supported by the STEVAL-MKI109D evaluation platform with a high-performance 32-bit microcontroller functioning as a bridge between the sensor and a PC, on which it is possible to use the downloadable MEMS Studio graphical user interface or dedicated software routines for customized applications.

  • Complete ISM330DHCX pinout for a standard DIL24 socket
  • Fully compatible with the STEVAL-MKI109D evaluation platform
STMicroelectronics

The STEVAL-MKIT04KA comprises four different adapters for DIL24 sockets: the STEVAL-MKI224V1, the STEVAL-MKI227A in the STEVAL-MKI227KA adapter kit, the STEVAL-MKI235A in the STEVAL-MKI235KA adapter kit, and the STEVAL-MKE003A in the STEVAL-MKI227KA and STEVAL-MKI235KA adapter kit.

All of the surface-mount devices are soldered on the boards. Male and female connectors must be manually soldered.

The STEVAL-MKE003A can be plugged over the STEVAL-MKI227A or the STEVAL-MKI235A board.

If the application using LSM6DSV16X is fixed, it is possible to solder a 0 ohm resistor instead of shunt in the JQ connector.

These adapters are individually supported by the STEVAL-MKI109V3 motherboard, which includes a high-performance 32-bit microcontroller functioning as a bridge between the sensor and a PC. On the STEVAL-MKI109V3 it is possible to use the downloadable graphical user interface of Unico-GUI or MEMS-Studio, or to use dedicated software routines for customized applications. It is also possible to plug the single board into X-NUCLEO-IKS01A3.

  • User friendly LSM6DSV16X, LIS2DUXS12, LPS22DF board
  • Complete LSM6DSV16X, LIS2DUXS12, LPS22DF pinout for a standard DIL 24 sockets
  • Fully compatible with the STEVAL-MKI109V3 motherboard
Monolithic Power Systems

The EVM54313-BJ-00A evaluation board demonstrates the capabilities of the MPM54313, a triple-output, fully integrated power module which integrates an I2C interface. Each output can support 3A, for a total of 9A. The MPM54313 offers a complete power solution with built-in, power-on and power-off sequencing control, configurable soft-start, compensation, and various protection thresholds.

Monolithic Power Systems

The EVM54313-BJ-00A evaluation board demonstrates the capabilities of the MPM54313, a triple-output, fully integrated power module which integrates an I2C interface. Each output can support 3 A, for a total of 9 A. The MPM54313 offers a complete power solution with built-in, power-on and power-off sequencing control, configurable soft-start, compensation, and various protection thresholds.

1 2 3 … 8