FTM Board Club
View boards from FTM issue 21-v
Issue 21-v
Sensing & Signal Chain
View boards from FTM issue 21-iv
Issue 21-iv
Motor Control
View boards from FTM issue 21-iii
Issue 21-iii
Intelligent Lighting
View boards from FTM issue 21-ii
Issue 21-ii
Embedded processing
View boards from FTM issue 21-i
Issue 21-i
Power Management
View boards from FTM issue 20-viii
Issue 20-viii
Connectivity
View boards from FTM issue 20-vii
Issue 20-vii
Industrial Automation
Boards featured in FTM 21-v
Future Electronics
FUT-MCP-NLFPGA-1
Multi-board AI demonstration system for robotics, motor control and image recognition

The Northern Lights demonstration system combines a video board performing machine vision functions, a display board, and a motor control board which directs a robot arm. The system demonstrates a practical implementation of machine learning through the application of neural network technology.

APPLY
Apply for Multi-board AI demonstration system for robotics, motor control and image recognition
Future Electronics
Sequana Thermal
Contactless temperature measurement and thermal imager in Arduino-compatible shield format

The Sequana Thermal board designed by Future Electronics combines a far-field infrared thermal sensor array, the MLX90640 from Melexis, and a PaPIR infrared proximity sensor from Panasonic. It is supplied in an Arduino-compatible shield format.

APPLY
Apply for Contactless temperature measurement and thermal imager in Arduino-compatible shield format
iWave
iW-RainboW-G40D
i.MX 8M Plus SMARC SOM Development Platform

The iW-RainboW-G40D i.MX 8M Plus SMARC SOM Development platform incorporates with NXP's i.MX 8M Plus Application Processor based SMARC SOM and Carrier board with all necessary interface connectors for developing an embedded application based on NXP's i.MX 8M Plus Application Processor.

APPLY
Apply for i.MX 8M Plus SMARC SOM Development Platform
Karo Electronics
QSXP-SV01
i.MX 8M Plus surface mounted QFN Computer On Module

A quad-core i.MX 8M Plus processor supplies the high-performance computing power for the Karo Electronics QSXP-ML81 SOM. It is supported by 2Gbytes of LPDDR4 DRAM and an 8Gbyte eMMC chip for data storage. The Karo Electronics QSXP QSBASE3 evaluation kit is supplied with a Linux® operating system pre-installed, and is ready for application development.

APPLY
Apply for i.MX 8M Plus surface mounted QFN Computer On Module
Maxim Integrated
MAX40108EVKIT
Evaluation Kit for the MAX40108

The MAX40108 evaluation kit (EV kit) provides a proven design to evaluate the MAX40108 precision, low-noise, low-drift dual-operational amplifier in a 6-bump wafer-level package (WLP). 

APPLY BUY NOW
Apply for Evaluation Kit for the MAX40108 Buy Evaluation Kit for the MAX40108
Maxim Integrated
MAX31343SHLD
Evaluation Kit for the MAX31343

The MAX31343 shield is a fully assembled and tested PCB to evaluate the MAX31343, low-cost, extremely accurate, real-time clock (RTC) with an I2C interface and power management.

APPLY BUY NOW
Apply for Evaluation Kit for the MAX31343 Buy Evaluation Kit for the MAX31343
Maxim Integrated
MAX41400EVKIT
Evaluation Kit for the MAX41400

The MAX41400 evaluation kit provides a proven design to evaluate the MAX41400 low-power precision instrumentation amplifier with programmable gain in a nine-bump wafer-level package (WLP).

APPLY BUY NOW
Apply for Evaluation Kit for the MAX41400 Buy Evaluation Kit for the MAX41400
Melexis
EVB90392
Evaluation board for MLX90392

The EVB90392 provides an easy way to connect the MLX90392 Triaxis® magnetic sensor IC to a microcontroller or measurement device. The EVB90392 provides an easy way to connect the MLX90392 Triaxis® magnetic sensor IC to a microcontroller or measurement device.

2 variants are proposed:

APPLY BUY NOW
Apply for Evaluation board for MLX90392 Buy Evaluation board for MLX90392
Monolithic Power Systems
EV6540-U-00A
5.5V to 35V, Three-Phase Brushless DC Motor Driver Evaluation Board

The EV6540-U-00A is an evaluation board for the MP6540, a three-phase BLDC motor driver.

APPLY
Apply for 5.5V to 35V, Three-Phase Brushless DC Motor Driver Evaluation Board
ON Semiconductor
AR0234CSSC28SUKAH3-GEVB
2.3MP Evaluation Board with 2MP Color 28deg Global Shutter CMOS Image Sensor

The AR0234CSSC28SUKAH3-GEVB Sensor Board uses the innovative AR0234CS 2.3MP Color 28deg Global Shutter sensor from ON Semiconductor. 

APPLY
Apply for 2.3MP Evaluation Board with 2MP Color 28deg Global Shutter CMOS Image Sensor
Renesas
ZMOD4410-EVK-HC-WP
Waterproof TVOC and Indoor Air Quality Sensor Platform Evaluation Kit

The ZMOD4410-EVK creates an easy way to evaluate the ZMOD4410 TVOC and Indoor Air Quality sensor.

APPLY BUY NOW
Apply for Waterproof TVOC and Indoor Air Quality Sensor Platform Evaluation Kit Buy Waterproof TVOC and Indoor Air Quality Sensor Platform Evaluation Kit
Renesas
ZMOD4510-EVK-HC
Outdoor Air Quality Sensor Platform Evaluation Kit

The ZMOD4510-EVK creates an easy way to evaluate the ZMOD4510 Outdoor Air Quality sensor. While the ASIC inside the sensor module controls the actual MOx and MEMS sensing element, the MCU-based electronic module controls the I²C to USB communication interface. 

APPLY BUY NOW
Apply for Outdoor Air Quality Sensor Platform Evaluation Kit Buy Outdoor Air Quality Sensor Platform Evaluation Kit
Sensirion
SEK-SCD41-SENSOR
Evaluation Kit SEK-SCD41

The evaluation kit for the SCD4x CO2 enables easy sensor evaluation and facilitated prototyping. Electrical interfacing can be realized either via the throughhole pads or alternatively via the included jumper cable that connects to the integrated JST connector. The compact design, the large supply voltage range and the mounting holes allow versatile prototyping

APPLY BUY NOW
Apply for Evaluation Kit SEK-SCD41 Buy Evaluation Kit SEK-SCD41
STMicroelectronics
KITOPAMP0920_Future
High-performance Op Amps sample kit

Make your next Analogue evaluation easier with this comprehensive FREE sample flyer offer:

APPLY
Apply for High-performance Op Amps sample kit
STMicroelectronics
NUCLEO-G474RE
STM32 Nucleo-64 development board with STM32G474RE MCU, supports Arduino and ST morpho connectivity

The STM32 Nucleo-64 board provides an affordable and flexible way for users to try out new concepts and build prototypes by choosing from the various combinations of performance and power consumption features, provided by the STM32 microcontroller. For the compatible boards, the external SMPS significantly reduces power consumption in Run mode.

APPLY BUY NOW
Apply for STM32 Nucleo-64 development board with STM32G474RE MCU, supports Arduino and ST morpho connectivity Buy STM32 Nucleo-64 development board with STM32G474RE MCU, supports Arduino and ST morpho connectivity
STMicroelectronics
NUCLEO-L4P5ZG
STM32 Nucleo-144 development board

The STM32 Nucleo-144 board with STM32L4P5ZGT6U MCU, supports Arduino, ST Zio and morpho connectivity, provides an affordable and flexible way for users to try out new concepts and build prototypes by choosing from the various combinations of performance and power consumption features, provided by the STM32 microcontroller.

APPLY BUY NOW
Apply for STM32 Nucleo-144 development board Buy STM32 Nucleo-144 development board
STMicroelectronics
STEVAL-MKI221V1
LSM6DSO32X adapter board for a standard DIL 24 socket

The STEVAL-MKI221V1 is an adapter board which allows evaluation of MEMS devices inside the LSM6DSO32X product family. The board offers an effective solution for fast system prototyping and device evaluation directly within the user’s application.

APPLY
Apply for LSM6DSO32X adapter board for a standard DIL 24 socket
STMicroelectronics
STEVAL-AETKT1V2
Evaluation kit for high voltage bidirectional current sense amplifier

The STEVAL-AETKT1V2 evaluation kit represents a bidirectional current sense amplifier with high side or low side sense resistor. 

APPLY BUY NOW
Apply for Evaluation kit for high voltage bidirectional current sense amplifier Buy Evaluation kit for high voltage bidirectional current sense amplifier
STMicroelectronics
EVALSTPM-3PHISO
Three-phase full shunt electricity meter evaluation board based on STPMS2, STISO621W and STM32F413RH

The EVALSTPM-3PHISO evaluation board implements a complete three-phase energy meter with low-cost shunt current sensors. The solution is based on the STPMS2 device, a double channel, 24-bits second order sigma-delta modulator, measuring voltage and current for each phase through a voltage divider and a shunt current sensor. Sensing circuitry and PCB layout are optimized to maximize signal-to-noise ratio for optimal accuracy.

APPLY
Apply for Three-phase full shunt electricity meter evaluation board based on STPMS2, STISO621W and STM32F413RH
STMicroelectronics
STEVAL-MKI220V1
LPS27HHTW adapter board for a standard DIL 24 socket

The STEVAL-MKI220V1 is an adapter board designed to facilitate the evaluation of MEMS devices in the LPS27HHTW product family. The board offers an effective solution for fast system prototyping and device evaluation directly within the user’s own application.The STEVAL-MKI220V1 can be plugged into a standard DIL 24 socket.

APPLY
Apply for LPS27HHTW adapter board for a standard DIL 24 socket
STMicroelectronics
STEVAL-MKI209V1K
MEMS inclinometer kit based on IIS2ICLX

The STEVAL-MKI209V1K evaluation board has an embedded IIS2ICLX inclinometer sensor, which is connected through flat cable to a simple adapter board (STEVAL-MKIGIBV2) to render it compatible with STEVAL-MKI109V3.

APPLY
Apply for MEMS inclinometer kit based on IIS2ICLX