The NCN26010XMNEVK from onsemi demonstrates the basic functionality of the NCN26010 Ethernet controller and transceiver, and doubles as a laboratory tool to allow engineers to develop embedded software drivers for the NCN26010 device.
The evaluation kit consists of the NCN26010BMNEVB bridge board and the NCN26010XMNEVB 10BASE-T1S evaluation board.
The NCN26000XMNEVB board for the onsemi NCN26000 10BASE-T1S Ethernet transceiver enables developers to evaluate the device’s performance in networks connected by unshielded twisted-pair cable.Â
This board provides a connection to third-party microcontroller evaluation boards which support a Clause 4-compliant MII interface. Additionally, it includes a USB Type-C® connector, facilitating connection to any PC based on a Linux® or Windows operating system. This enables PCs to join a 10BASE-T1S multi-drop network. The board can also be used to monitor traffic on the multi-drop segment by running the Wireshark network protocol analyzer on a PC.
The NCP-NCV51561TO2473LGEVB is an evaluation board for the NCP/NCV5156x gate driver family, which is suitable for driving the SiC MOSFETs typically used to achieve high efficiency in BESS power conversion circuits.
The NCP-NCV51563D2PAK7LGEVB is an evaluation board for the NCP/NCV51563 gate driver family, which is suitable for driving the SiC MOSFETs typically used to achieve high efficiency in BESS power conversion circuits.
This evaluation kit is a reference design for the CLLC bidirectional DC-DC converter stage of an EV’s onboard charger (OBC). The reference design consists of multiple boards which provide for separation between the control and power conversion functions.
This evaluation board provides a ready-made hardware system for testing the operation of onsemi 1200V, T-type neutral point clamped (TNPC) silicon carbide (SiC) MOSFET modules.
