The EK-RA4L1 evaluation kit enables users to seamlessly evaluate the features of theĀ RA4L1 MCU groupĀ and develop embedded systems applications using Renesas’Ā Flexible Software Package (FSP)Ā andĀ e2Ā studioĀ IDE.
The EK-RA8P1 evaluation kit is designed to enable users to easily evaluate the RA8P1 MCU features and develop embedded system applications using Renesas’ Flexible Software Package (FSP) and e2Ā studio IDE.
The RZ/V2N AI MPU evaluation kit may be used to evaluate the Renesas RZ/V2N quad-core vision AI microprocessor.Ā
The Bluetooth Low Energy Development Kit Pro for the DA14533 SmartBond TINY automotive system-on-chip (SoC) from Renesas includes a motherboard, daughterboard, and cables. It is the ideal platform for evaluating the performance of the small, low-power DA14533 in applications such as tire pressure monitoring and passive keyless entry.Ā
The kit provides users with the following capabilities:
The ZSSC3286KIT evaluation kit from Renesas provides the hardware needed for the configuration, calibration, and evaluation of the IO-Link ready ZSSC3286 sensor signal conditioner (SSC) IC.Ā
The user’s PC can communicate via USB with the ZSSC3286 IC on the ZSSC3286 evaluation board via IO-Link, using the included RH4Z2501-PMOD board, an IO-Link physical layer transceiver board with a Pmodā¢ interface, and the 2-channel IO-Link master.Ā
The ZSSC3286 evaluation kit also contains a sensor signal conditioning communication board for configuration via an IĀ²C interface.
The ZSSC3286KIT is an all-in-one evaluation system which includes:
The RTK-251-SinkCharger-RAA489118 from Renesas is a single-port reference design for implementing battery systems with from two to seven lithium-ion battery cells connected in series. It supports two modes: in one, power is supplied solely from the USB Type-CĀ® port; in the other, it enables a power bank function in combination with a li-ion battery with a battery management system (BMS).
Due to losses in the cable, onboard charger, and board, the USB Power Delivery (PD) controller requires appropriate USB Type-C input levels from the USB Type-C source device to operate the battery system effectively. Switches on this evaluation board allow the selection of the number of batteries in series and the charging current.
The firmware for this evaluation board is generated using an instruction tool called VIDWriter.
