Security

The CAM-56G3 modules from STMicroelectronics provide a ready-made camera system for evaluation and integration of the VD56G3 1.5 Mpixel monochrome image sensor. These ready-to-use cameras combine a VD56G3 image sensor, lens holder, lens, and flexible printed circuit connection, integrated into a single module as small as 6.5 mm².

Multiple GPIOs enable users to synchronize the modules with triggers and illumination. Featuring a MIPI CSI-2 output interface, the modules are ideally suited for use in low-power embedded systems.

The VD56G3 image sensor on which the camera modules are based provides outstanding performance in the visible and near infrared portions of the spectrum. Featuring a proprietary ST pixel design, the image sensor offers a broad toolbox of on-chip functions which include features for optimizing data size and frame rates, such as crop, binning, and programmable sequences.

The sensor is supplied by ST as a bare die, so the CAM-56G3 modules provide an easier integration option for OEMs. The modules are backed by a comprehensive set of enablement software, drivers and evaluation tools, including drivers for a Linux^® operating system.

The P-NUCLEO-53L8A1 from STMicroelectronics is a complete evaluation kit for learning about, evaluating, and developing applications with the VL53L8 series of direct time-of-flight (ToF) sensors.

The STEVAL-56G3MAI module enables easy evaluation of the VD56G3 1.5 Mpixel monochrome image sensor from STMicroelectronics. The module features a soldered sensor, an M12 lens holder screwed to the board, and a removable lens. The module also has a flex cable to connect to a broad range of embedded processing platforms. 

The module is one of a family of modules for evaluating various products in the ST BrightSense image sensor portfolio. All share the same standard connector and pinout, to enable easy replacement of one image sensor with another in proof-of-concept designs. 

All of the image sensor modules are backed by a comprehensive set of enablement software, drivers and evaluation tools, including drivers for a Linux^® operating system. The modules also support GUI software for evaluation when paired with the ST EVK Main board.