Infineon

The OPTIGA‚ĄĘ Trust M IoT Security Development Kit demonstrates an easy way to implement end-to-end security for IoT devices. The kit enables customers to develop prototypes of various security use cases, and to build full-featured IoT applications that are connected to the cloud.¬†

STMicroelectronics

The STM32H757I-EVAL, a high-end development platform for the STM32H757XI microcontroller, provides access to all the STM32 peripherals for user applications. It includes an embedded STLINK-V3E debugger/programmer.

Expansion connectors provide an easy way to add specialized features, while ETM trace is supported through external probes. 

 

Renesas

The EK-RA4M2 evaluation kit enables users to evaluate the features of the RA4M2 Group microcontrollers, and to develop embedded applications using the Renesas Flexible Software Package (FSP) and e2 studio integrated development environment. 

A rich set of on-board features can be combined with a choice of popular add-ons from the microcontroller ecosystem to realize new application ideas. The EK-RA4M2 board comes pre-programmed with a Quick Start example project, with source code provided in the EK-RA4M2 example project bundle.

The kit’s contents are the EK-RA4M2 board, and a microUSB device cable, Type-A male to Micro-B male. 

The board features a USB Full-Speed host and device interface. The 5 V input source is either from USB or an external power supply.

 

Watch: RA4M2 Group microcontroller advantages

Microchip

The AT88CKSCKTUDFN-XPRO is a Microchip XPRO extension kit for Microchip CryptoAuthentication‚ĄĘ devices that are supplied in an 8-pin UDFN package. The board attaches to any Microchip microcontroller board that supports the XPRO interface.¬†

The boards operate with the following Microchip devices:

  • ATECC108A/508A/608A – elliptic curve security devices with I2C or single-wire interface
  • ECC204 – elliptic curve security device with with I2C or single-wire interface
  • TA010 – automotive-grade elliptic curve security device with I2C or single-wire interface
  • ATSHA204A – symmetric security device with I2C or single-wire interface
  • SHA104 – symmetric security device with I2C or single-wire interface, for client-side applications
  • SHA105 – symmetric security device with I2C interface, for host-side applications
  • ATAES132A – secure memory device with I2C or SPI interface

The boards can be used as a learning tool, a development tool, or for configuring and provisioning devices in limited quantities.

STMicroelectronics

This STM32 Nucleo-144 board provides an affordable and flexible way for developers to build prototypes based on the STM32H563 microcontroller. 

The ST Zio connector, which extends ARDUINO¬ģ Uno V3 connectivity, and the ST morpho headers provide an easy means of expanding the functionality of the Nucleo open development platform with a wide choice of specialized shields.

The STM32 Nucleo-144 board does not require any separate probe as it integrates an ST-LINK debugger/programmer. The board comes with the comprehensive, free software libraries and examples available with the STM32Cube MCU Package.

 

Watch: Introducing the STM32H5 series

Watch: Security for the IoT

 

Infineon

EVAL-S25HL512T also referred to as the SEMPER S25HL512T memory module, is a low cost PMOD compatible memory module which integrates a 512Mb 3.3V SEMPER‚ĄĘ NOR Flash memory (S25HL512T). This memory module enables quick and easy integration of the¬†SEMPER‚ĄĘ NOR Flash¬†into any development kit.

STMicroelectronics

The STM32MP157D-DK1 and STM32MP157F-DK2 Discovery kits leverage the capabilities of the increased-frequency 800 MHz microprocessors in the STM32MP157 product line to allow users to develop applications easily using STM32 MPU OpenSTLinux Distribution software for the main processor and STM32CubeMP1 software for the coprocessor.

Nexperia

The NEH2000BY evaluation board enables designers to evaluate and test the NEH2000BY energy-harvesting PMIC’s performance and features. Its small form factor enables easy integration into prototype designs. 

The evaluation board is available in two variants: 

  • NEH2000BY-3V5 for use with lithium iron phosphate (LiFe) rechargeable batteries
  • NEH2000BY-4V2 for use with lithium-ion and lithium-ion polymer (LiPo) rechargeable batteries¬†

Users of the evaluation board also need a photovoltaic cell, rechargeable battery, and multimeter.

Renesas

The EK-RA6M5 evaluation kit enables users to evaluate the features of the RA6M5 Group microcontrollers, and to develop embedded applications using the Renesas Flexible Software Package (FSP) and e2 studio integrated development environment. 

A rich set of on-board features can be combined with a choice of popular add-ons from the microcontroller ecosystem to realize new application ideas. The EK-RA6M5 comes pre-programmed with a Quick Start example project, with source code provided in the EK-RA6M5 Example Project Bundle.

The kit’s contents are the EK-RA6M5 board, a microUSB device cable (Type-A male to Micro-B male), a MicroUSB host cable (Type-A male to Micro-B male), and an Ethernet patch cable. 

The board features a USB Full-Speed host and device interface. The 5 V input source is either from USB or an external power supply.