Motor drives and motor control
The B-G473E-ZEST1S Discovery kit, a part of the STMicroelectronics motor-control development platform, supports the ZeST and HSO algorithms.
The B-G473E-ZEST1S is a control board featuring a STM32G473QET6 microcontroller in a ZeST Discovery pack. It works with a power board such as the STEVAL-LVLP01, an optional adaptor board such as the B-ZEST-ADAPT1, and an accessories package such as the B-MOTOR-PMSMA1.
The B-G473E-ZEST1S control board is connected to the power board or adaptor board through an embedded V2 motor-control connector. The board can also operate with the X-NUCLEO-IHM08M1, X-NUCLEO-IHM09M1, or X-NUCLEO-IHM16M1 motor-driver expansion boards via a Morpho motor-control connector.
The board includes an integrated STLINK-V3EC in-circuit debugger and programmer.
Part supported: BRD1265C
Kit part number: RDK-964
Reference design for a 300 W 3-phase inverter using BRD1265C with IPH current information in field-oriented Control (FOC) operation
Reference design kits (Click the part number for the specific device)
Part supported: BRD1260C
Kit part number: RDK-851
Reference design for a 50 W, three-phase inverter using the BRD1260C to drive a fan.
Part supported: BRD1263C
Kit part number: RDK-852
Reference design for a 200 W, three-phase inverter using the BRD1263C.
Part supported: BRD1265C
Kit part number: RDK-853
Reference design for a 300 W, three-phase inverter using the BRD1265C.
Part supported: BRD1261C
Kit part number: RDK-872
Reference design for a 70 W, single-phase inverter using the BRD1261C to drive a fan.
Part supported: BRD1260C
Kit part number: RDK-873
Reference design for a 30 W, single-phase BLDC motor inverter using the BRD1260C.
The MCK-RA4T1 is a development kit that enables easy evaluation of motor control using permanent magnet synchronous motors (brushless DC motors)
The Infineon EVAL_IMD700A_FOC_3SH board, featuring a microcontroller, configurable gate driver, on-board power supplies and circuit protection functions, is capable of driving a motor rated for up to 300 W using sensorless field-oriented control (FOC). The EVAL_IMD700A_FOC_3SH is based on the MOTIX™ IMD701A fully programmable motor controller, which combines an XMC1404 MCU with a 6EDL7141 three-phase gate driver IC in a single package, driving 3 mm x 3 mm OptiMOS™ 6 40 V/1.5 mΩ external power MOSFETs.
The board supports the development of battery-operated products that use a brushless dc or permanent magnet synchronous motor. This motor controller solution is notable for its high efficiency, small size, and low component count.
The EVAL_IMD700A_FOC_3SH can operate independently or with an Infineon motor control GUI. It operates at up to 300 W with no heat-sink required.