Security and encryption

STMicroelectronics

The STM32H573I-DK Discovery kit is a complete demonstration and development platform for the STM32H573IIK3Q microcontroller, featuring an ArmĀ® CortexĀ®ā€‘M33 core with ArmĀ TrustZoneĀ®.

The full range of hardware features available on the board (such as an RGB interface LCD with touch panel, USART, USB Type-CĀ® FS (Source/Sink), Ethernet, microSDā„¢, Octoā€‘SPI flash memory, SAI audio codec stereo with audio jack input/output, MEMS digital microphone, and others) help users to interface with the STM32H5 MCU peripherals and develop their applications. Several connectors such as ARDUINOĀ® Uno V3, Pmodā„¢, and STMod+ are also available on the board to provide an easy way to connect extension shields or daughterboards for specific applications.

The STM32H573I-DK Discovery kit integrates an STLINK-V3EC embedded in-circuit debugger and programmer for the STM32 microcontroller with a USB Virtual COM port bridge and comes with the STM32CubeH5 Expansion Package, which gathers in one single package all the generic embedded software components required to develop an application on STM32H5 microcontrollers and provides several examples and applications for easy understanding.

STMicroelectronics

The STPM4RasPIV21 is an extension board to connect the ST33KTPM products to the Raspberry PiĀ® and STM32 microprocessor development kits such as STM32MP157F-DK2, or STM32MP135F-DK. The board is designed for product evaluation, use case development and integration activities. The board is shipped with one trusted platform module soldered.

STMicroelectronics

The X-NUCLEO-SAFEA1 expansion board is based on the STSAFE-A110 secure element. It can be used with any STM32 Nucleo development board.

The on-board STSAFE-A110 is customized with a standard profile for evaluation and is compatible with the Arduino UNO R3 connector.

The X-NUCLEO-SAFEA1 expansion board is used with free X-CUBE-SAFEA1 or X-CUBE-SBSFU software packages containing sample code to demonstrate how to implement security applications.

Infineon

The OPTIGAā„¢ Trust M IoT Security Development Kit is the easiest way to develop and evaluate end-to-end security use cases for IoT devices. The kit enables designers to build prototypes of security applications and build full-featured IoT applications. The board includes:

  • OPTIGA Trust M security solution
  • PSoCā„¢ 62, an ArmĀ® CortexĀ®-M4/Cortex-M0+-based microcontroller
  • AIROCā„¢ CYW43012, a low-power system-on-chip which supports dual-band 2.4 GHz and 5.0 GHz Wi-FiĀ®/BluetoothĀ® 5.0 networking

This development board is supplied with two ready-to-use security use cases:

  • Secured communication with AWS over MQTT using cryptography support from the OPTIGA Trust M
  • Secure, zero-touch cloud provisioning using a CIRRENTā„¢ Cloud ID and the pre-provisioned X.509 certificate delivered with the OPTIGA Trust M

The kit is supported by the ModusToolboxā„¢ design tool. The OPTIGA Trust M host library is available as open source code.

 

STMicroelectronics

The X-NUCLEO-SAFEA1 expansion board based on the STSAFE-A110 secure element can be used with any STM32 Nucleo development board. It is supplied with free X-CUBE-SAFEA1 and X-CUBE-SBSFU software packages.Ā 

The board includes an HE10 extension connector to mount additional STSAFE devices, and an Arduino UNO R3 connector.Ā 

 

Microchip

The AT88CKSCKTUDFN-XPRO is a Microchip XPRO extension kit for Microchip CryptoAuthenticationā„¢ devices that are supplied in an 8-pin UDFN package. The board attaches to any Microchip microcontroller board that supports the XPRO interface.Ā 

The boards operate with the following Microchip devices:

  • ATECC108A/508A/608A – elliptic curve security devices with I2C or single-wire interface
  • ECC204 – elliptic curve security device with with I2C or single-wire interface
  • TA010 – automotive-grade elliptic curve security device with I2C or single-wire interface
  • ATSHA204A – symmetric security device with I2C or single-wire interface
  • SHA104 – symmetric security device with I2C or single-wire interface, for client-side applications
  • SHA105 – symmetric security device with I2C interface, for host-side applications
  • ATAES132A – secure memory device with I2C or SPI interface

The boards can be used as a learning tool, a development tool, or for configuring and provisioning devices in limited quantities.

1 2 3