Security and encryption

STMicroelectronics

The X-NUCLEO-SAFEA1 expansion board is based on the STSAFE-A110 secure element. It can be used with any STM32 Nucleo development board.

The on-board STSAFE-A110 is customized with a standard profile for evaluation and is compatible with the Arduino UNO R3 connector.

The X-NUCLEO-SAFEA1 expansion board is used with free X-CUBE-SAFEA1 or X-CUBE-SBSFU software packages containing sample code to demonstrate how to implement security applications.

Infineon

The OPTIGA™ Trust M IoT Security Development Kit is the easiest way to develop and evaluate end-to-end security use cases for IoT devices. The kit enables designers to build prototypes of security applications and build full-featured IoT applications. The board includes:

  • OPTIGA Trust M security solution
  • PSOC™ 62, an Arm® Cortex®-M4/Cortex-M0+-based microcontroller
  • AIROC™ CYW43012, a low-power system-on-chip which supports dual-band 2.4 GHz and 5.0 GHz Wi-Fi®/Bluetooth® 5.0 networking

This development board is supplied with two ready-to-use security use cases:

  • Secured communication with AWS over MQTT using cryptography support from the OPTIGA Trust M
  • Secure, zero-touch cloud provisioning using a CIRRENT™ Cloud ID and the pre-provisioned X.509 certificate delivered with the OPTIGA Trust M

The kit is supported by the ModusToolbox™ design tool. The OPTIGA Trust M host library is available as open source code.

 

STMicroelectronics

The X-NUCLEO-SAFEA1 expansion board based on the STSAFE-A110 secure element can be used with any STM32 Nucleo development board. It is supplied with free X-CUBE-SAFEA1 and X-CUBE-SBSFU software packages. 

The board includes an HE10 extension connector to mount additional STSAFE devices, and an Arduino UNO R3 connector. 

 

Microchip

The AT88CKSCKTUDFN-XPRO is a Microchip XPRO extension kit for Microchip CryptoAuthentication™ devices that are supplied in an 8-pin UDFN package. The board attaches to any Microchip microcontroller board that supports the XPRO interface. 

The boards operate with the following Microchip devices:

  • ATECC108A/508A/608A – elliptic curve security devices with I2C or single-wire interface
  • ECC204 – elliptic curve security device with with I2C or single-wire interface
  • TA010 – automotive-grade elliptic curve security device with I2C or single-wire interface
  • ATSHA204A – symmetric security device with I2C or single-wire interface
  • SHA104 – symmetric security device with I2C or single-wire interface, for client-side applications
  • SHA105 – symmetric security device with I2C interface, for host-side applications
  • ATAES132A – secure memory device with I2C or SPI interface

The boards can be used as a learning tool, a development tool, or for configuring and provisioning devices in limited quantities.

Infineon

The OPTIGA™ Trust M IoT Security Development Kit demonstrates an easy way to implement end-to-end security for IoT devices. The kit enables customers to develop prototypes of various security use cases, and to build full-featured IoT applications that are connected to the cloud. 

STMicroelectronics

The STM32MP157D-EV1 and STM32MP157F-EV1 Evaluation boards are the full-feature demonstration and development platforms for STMicroelectronics increased-frequency 800 MHz Arm®-based dual Cortex®-A7 32 bits and Cortex-M4 32 bits MPUs in the STM32MP1 Series.

Two options are available:

  • STM32MP157D-EV1: standard evaluation board
  • STM32MP157F-EV1: includes secure boot and cryptography features
1 2 3 4 5