Consumer

STMicroelectronics

The STEVAL-56G3MAI module enables easy evaluation of the VD56G3 1.5 Mpixel monochrome image sensor from STMicroelectronics. The module features a soldered sensor, an M12 lens holder screwed to the board, and a removable lens. The module also has a flex cable to connect to a broad range of embedded processing platforms. 

The module is one of a family of modules for evaluating various products in the ST BrightSense image sensor portfolio. All share the same standard connector and pinout, to enable easy replacement of one image sensor with another in proof-of-concept designs. 

All of the image sensor modules are backed by a comprehensive set of enablement software, drivers and evaluation tools, including drivers for a Linux® operating system. The modules also support GUI software for evaluation when paired with the ST EVK Main board.

STMicroelectronics

The STM32 Nucleo-64 board for the STMicroelectronics STM32U3 series of ultra low-power microcontrollers provides an affordable and flexible way for users to try out new concepts and build prototypes.

 

Infineon

This kit provides a development platform for the Sona™ IF513 module from Ezurio, which is based on the CYW55513 Wi-Fi 6/Bluetooth wireless chipset from Infineon. 

Key features: 

  • Antenna type: 2 x MHF4L connector for antenna diversity
  • Form factor: pluggable M.2 2230 E-Key 
  • Frequencies supported: 2.4 GHz/ 5 GHz /6 GHz
  • Wireless technologies: Wi-Fi 6E, Bluetooth 6.0



Infineon

The EVK-MAYA-W381 from u-blox provides a ready-made application environment for designers working with the MAYA-W381, a module which is based on the CYW55513 Wi-Fi 6/Bluetooth wireless chipset from Infineon. The module provides two external antennas for tri-band Wi-Fi 6/6E and Bluetooth 6.0 connectivity. 

 

Key features of the EVK-MAYA-W381 include:  

  • SD card adapters to access the SDIO host interface
  • USB interface to easily access the Bluetooth UART interface via a USB-to-UART bridge
  • Digital and analog audio interfaces for Bluetooth wireless networks 
  • SMA connectors for external antennas
  • GPIO pins and other module interfaces accessible through pin headers
  • Multiple power-supply options
Infineon

Evaluation board, EVAL-6EDL04I065PR, features Infineon’s latest silicon-in-insulator (SOI) EiceDRVIER™ gate driver IC, 6EDL04I065PR, and TRENCHSTOP™ Reverse Conducting (RC) IGBT, IKD06N60RC2, in a compact, cost-effective three-phase inverter bridge designed to drive a brushless direct current (BLDC) motor.

STMicroelectronics

The EVSPIN32G02Q1S1 board from STMicroelectronics is a complete three-phase inverter design based on the STSPIN32G0251 controller, which integrates a three‑phase 250 V gate driver and an Arm® Cortex®-M0+-based STM32 microcontroller.

1 … 4 5 6 7 8 … 27