The dsPIC33CK Curiosity Development Board is a cost-effective development and demonstration platform for the dsPIC33CK family of single-core digital signal controllers.

The board takes advantage of the Microchip MPLAB® X integrated development environment. It includes an integrated programmer/debugger and requires no additional hardware, making it a good starting point for exploring the dsPIC33C family.


The CYUSB3KIT-003 EZ-USB™ FX3 SuperSpeed explorer kit is an easy-to-use development platform which enables developers to add USB 3.0 device functionality to any system. The kit helps engineers to develop solutions based on the CYUSB301x family of EZ-USB FX3 USB 3.0 peripheral controllers.


The RL78/G16 Fast Prototyping Board is easy to use – simply plug in a USB cable to write/debug a program and start evaluation without any additional tools. 

The board, which is based on a 32-pin RL78/G16 MCU, also enables advanced debugging using the E2 emulator Lite or the traditional E2 emulator. The board is supplied with Arduino Uno, Pmod™ and Grove interfaces, and has high scalability with access to all pins on the MCU. It is equipped with two touch buttons and one touch slider.

Power Integrations

Reference design kits (Click the part number for the specific device)

Part supported: BRD1260C
Kit part number: RDK-851
Reference design for a 50 W, three-phase inverter using the BRD1260C to drive a fan. 

Part supported: BRD1263C
Kit part number: RDK-852
Reference design for a 200 W, three-phase inverter using the BRD1263C. 

Part supported: BRD1265C
Kit part number: RDK-853
Reference design for a 300 W, three-phase inverter using the BRD1265C. 

Part supported: BRD1261C
Kit part number: RDK-872
Reference design for a 70 W, single-phase inverter using the BRD1261C to drive a fan.

Part supported:  BRD1260C
Kit part number: RDK-873
Reference design for a 30 W, single-phase BLDC motor inverter using the BRD1260C. 


The XMC7200 evaluation kit enables engineers to evaluate the XMC7200D microcontroller, which combines a single or dual 350 MHz Arm® Cortex®-M7 core as the primary application processor and a 100 MHz Cortex-M0+ core for system functions. The XMC7200D for industrial applications is a programmable embedded system-on-chip, offering:

  • Low-power operation
  • Up to 8 Mbytes of Flash and 1 Mbyte of SRAM
  • Gigabit Ethernet interface
  • CAN FD interface
  • SDHC interface
  • Programmable analog and digital peripherals 

Infineon ModusToolbox™ software supports application development using the XMC7200 evaluation kit by providing a board support package and validated code examples.

1 8 9 10 11 12 26