The STEVAL-MKI235KA evaluation kit is based on the LIS2DUXS12 inertial module with a Qvar electrostatic sensor and three different electrodes. It is compatible with the STEVAL-MKI109V3 MEMS sensing motherboard. 

The kit provides the complete LIS2DUXS12 pinout and comes ready-to-use with the required decoupling capacitors on the power-supply line.

The STEVAL-MKI109V3 motherboard includes a high-performance 32-bit microcontroller functioning as a bridge between the sensor and a PC, on which it is possible to use the downloadable graphical user interface, Unico-GUI, or dedicated software routines for custom applications.

It is also possible to plug the board into an X-NUCLEO-IKS01A3 expansion board.

Bosch Sensortec

The BMM350 Shuttle Board provides access to the pins on the BMM350 magnetometer via a simple socket, for convenient application development. It can be directly plugged into Bosch Sensortec’s Application Board 3.0.


The Infineon EVAL_IMD700A_FOC_3SH board, featuring a microcontroller, configurable gate driver, on-board power supplies and circuit protection functions, is capable of driving a motor rated for up to 300 W using sensorless field-oriented control (FOC). The EVAL_IMD700A_FOC_3SH is based on the MOTIX™ IMD701A fully programmable motor controller, which combines an XMC1404 MCU with a 6EDL7141 three-phase gate driver IC in a single package, driving 3 mm x 3 mm OptiMOS™ 6 40 V/1.5 mΩ external power MOSFETs.

 The board supports the development of battery-operated products that use a brushless dc or permanent magnet synchronous motor. This motor controller solution is notable for its high efficiency, small size, and low component count.  

 The EVAL_IMD700A_FOC_3SH can operate independently or with an Infineon motor control GUI. It operates at up to 300 W with no heat-sink required.



The RZ/T2L evaluation kit features an on-board debugger, making it possible to evaluate the microprocessor without an external in-circuit emulator when used in combination with the Renesas e2 studio development tool.


The STEVAL-MKI200V1K evaluation kit consists of a probe with the STTS22H temperature sensor connected via flat cable to the STEVAL-MKIGIBV1 adapter board, so it can interface with the STEVAL-MKI109V3 motherboard.


The EVALSTDRIVE101 is a demonstration board based on the STDRIVE101, a three-phase gate driver, and STL110N10F7 power MOSFETs. The board drives three-phase brushless dc motors. It can be interfaced with various STM32 microcontrollers through a motor control connector.