Lighting

STMicroelectronics

The X-NUCLEO-53L4A3 from STMicroelectronics is an expansion board for any STM32 Nucleo board equipped with Arduino R3 connectors which enables designers to develop applications using the VL53L4ED short-range time-of-flight (ToF) proximity sensor.

The expansion board is supplied with a cover glass holder in which designers can fit a spacer of 0.25 mm, 0.5 mm, and 1 mm height below the cover glass to simulate a variety of air gaps. A small oval cover glass fitting the sensor is included.

The kit includes:

  • Two different cover glass units to protect the sensor from dust
  • Compatible with STM32 Nucleo development boards
  • Equipped with Arduino® UNO R3 connectors
  • Full system software, including code examples and a graphical user interface
Infineon

This kit provides a development platform for the Sona™ IF513 module from Ezurio, which is based on the CYW55513 Wi-Fi 6/Bluetooth wireless chipset from Infineon. 

Key features: 

  • Antenna type: 2 x MHF4L connector for antenna diversity
  • Form factor: pluggable M.2 2230 E-Key 
  • Frequencies supported: 2.4 GHz/ 5 GHz /6 GHz
  • Wireless technologies: Wi-Fi 6E, Bluetooth 6.0



Infineon

The EVK-MAYA-W381 from u-blox provides a ready-made application environment for designers working with the MAYA-W381, a module which is based on the CYW55513 Wi-Fi 6/Bluetooth wireless chipset from Infineon. The module provides two external antennas for tri-band Wi-Fi 6/6E and Bluetooth 6.0 connectivity. 

 

Key features of the EVK-MAYA-W381 include:  

  • SD card adapters to access the SDIO host interface
  • USB interface to easily access the Bluetooth UART interface via a USB-to-UART bridge
  • Digital and analog audio interfaces for Bluetooth wireless networks 
  • SMA connectors for external antennas
  • GPIO pins and other module interfaces accessible through pin headers
  • Multiple power-supply options
Nexperia

The Nexperia NEVB-MCTRL-100 BLDC motor driver kit provides a full motor drive solution for 12 V to 48 V, three-phase brushless dc (BLDC) motors. 

The kit features PCBs designed for the Nexperia NextPower MOSFET family housed in an LFPAK56 package, and the modular design allows for different motor controllers, gate drivers, MOSFETs and motors to be used. In addition, each board provides convenient test points for power, motor drive, and sensing signals to aid with development and testing with the Nexperia LFPAK56 MOSFET family. 

The motor controller board is compatible with the Leonardo R3 and Nucleo development board form factors.

Power Integrations

The RDK-1002 from Power Integrations is a reference design kit which facilitates development with the InnoSwitch™5-Pro family of flyback switcher ICs. It implements a USB Power Delivery 3.1 extended power range (EPR) power supply supporting loads up to 140 W. It operates from an input-voltage range of 90 V to 265 V ac, and achieves conversion efficiency of up to 95%. It supports variable output voltages in a range from 5 V to 28 V.

 

1 2 3 4 … 7