Lighting

Microchip

The DT100104 from Microchip is an add-on board for the CryptoAuth Trust Platform and other Microchip development platforms that contain a mikroBUSTM header. The board can be used to develop prototypes for applications which use the ATECC608B or ATECC08C CryptoauthenticationTM secure elements. This board offers an alternative to sample units that require a socket board for initial development and testing.

The DT100104 board features eight ATECC608C secure elements which are specified to provide Trust&GO, TrustFLEX, TrustCUSTOM, and TrustMANAGER functions. The board is supported by a user guide which provides a physical overview of the connections and switch settings implemented on the board.

Murata

Murata supplies the IMX-060 evaluation board to provide a ready-made hardware environment for testing its IRA-S series of pyroelectric infrared (PIR) sensors. 

The IRA-S sensors are available in a leaded package. Murata also makes a range of five fresnel lenses, supplied separately. This evaluation board features an IRA-S210ST01 sensor with the IML-0685 and IML-0688 lenses.

STMicroelectronics

The EVSPIN958 single brushed dc motor driver expansion board is an easy-to-use solution for testing the performance of the STSPIN958 5 A full-bridge driver from STMicroelectronics. It supports a voltage range from 5 V to 58 V with a phase current up to 5 A.

Infineon

The XMC1400 series from Infineon enables design engineers to safely handle motor systems consuming up to hundreds of Watts. The debug interface is isolated from the XMC1400 microcontroller and the position detection interfaces to guarantee safe operation during software development. 

The kit includes a power board connector, a set of position interface circuits with Hall sensor and encoder connectors, a USIC interface, and the isolated on-board debug interface.

Together with a three-phase inverter, the board demonstrates the capabilities of the XMC1402 MCU. The board includes six LEDs, two for power indication, one user LED, one encoder-enabled indicator LED, and two debug LEDs, and a potentiometer.

STMicroelectronics

The EVL012LED is an LED driver board. The architecture is based on a two-stage approach: a front-end PFC pre-regulator and a downstream resonant half-bridge converter, using the new STNRG012 IC that integrates the controllers of both sections in a single device. 

The main features of this design are high efficiency, low power consumption at no load without an auxiliary supply, good power factor with low harmonic content, and reduced component count. 

The board also has a full set of protection features including output overload, short-circuit, and over-voltage, all of which can be easily defined as latched or auto-restart by changing a value in the non-volatile memory of the controller.

1 2 3 4 5 … 7