Infineon
Develop with EXCELON™ Ultra F-RAM – The industry’s highest-performance mission-critical data-logging memory
Infineon
Infineon
EZ-PD™ PMG1-B1 is USB-C PD controller + buck-boost controller + battery charger + MCU + individual cell monitoring and protection in a single chip.
Infineon
Embedded Artists provides a modular and flexible approach to the evaluation of Wi-Fi® and Bluetooth® solutions, enabling designers to judge the trade-offs between performance, cost, power consumption, and longevity. The Embedded Artists 1LV M.2 Module board is intended for development with the Murata Type 1LV module, which is based on the Infineon CYW43012 Wi-Fi/Bluetooth system-on-chip, and requires an M.2 connector and host processor for full evaluation.
The Embedded Artists board provides access to maintained software drivers for the Linux® operating system and Infineon WICED firmware. The kit has been developed in close collaboration with Murata and Infineon.
Infineon
This evaluation kit provides a test platform for Infineon’s single-channel non-isolated gate driver IC with truly differential inputs EiceDRIVER™ 1EDN7550B in SOT-23 6pin package.
Infineon
This evaluation board is intended to show the strengths of the EiceDRIVER™ 1EDN TDI (1EDN8550B or 1EDN7550B), family of single-channel low-side gate drivers with innovative truly differential inputs (TDI) concept.
Infineon
The CYUSB3KIT-003 EZ-USB™ FX3 SuperSpeed explorer kit is an easy-to-use development platform which enables developers to add USB 3.0 device functionality to any system. The kit helps engineers to develop solutions based on the CYUSB301x family of EZ-USB FX3 USB 3.0 peripheral controllers.