Infineon

Infineon

The PSoCā„¢ 62S4 Pioneer Kit is a low-cost hardware platform that enables engineers to develop products based on the PSoCā„¢ 62 microcontroller and debug their designs. ModusToolboxā„¢ software provides support for application development.

The kit includes the CY8C62x4 PSoC 62 Performance Line MCU, which features:

  • 150 MHz ArmĀ® CortexĀ®-M4 and 100 MHz Arm Cortex-M0+ cores
  • 256 kbytes of Flash
  • 128 kbytes of SRAM
  • Programmable analog blocks including two 12-bit SAR ADCs
  • Programmable digital blocks
  • Full-Speed USB interface
  • Serial memory interface
  • CAN-FD interface
  • CAPSENSEā„¢ capacitive sensing
Infineon

The CY7113 EZ-PDā„¢ PMG1-S3 prototyping kit is a development platform to design products which can be powered from a high-voltage USB PD port, and also need a microcontroller with CAPSENSEā„¢ capability to implement different features.

Infineon

The PSoCā„¢ 62S2 Wi-Fi BT Pioneer Kit (CY8CKIT-062S2-43012) is a low-cost hardware platform that enables design and debug of the PSoCā„¢ 62 MCU and the Murata 1LV Module (CYW43012 Wi-Fi + Bluetooth Combo Chip).

Infineon

The Infineon CYW920820M2EVB-01 Evaluation kit enables you to evaluate and develop single-chip BluetoothĀ® applications using the AIROCā„¢ CYW20820, an ultra-low-power Bluetooth & Bluetooth LE system on a chip.

Infineon

The Infineon EVAL_IMD700A_FOC_3SH board, featuring a microcontroller, configurable gate driver, on-board power supplies and circuit protection functions, is capable of driving a motor rated for up to 300 W using sensorless field-oriented control (FOC). The EVAL_IMD700A_FOC_3SH is based on the MOTIXā„¢ IMD701A fully programmable motor controller, which combines an XMC1404 MCU with a 6EDL7141 three-phase gate driver IC in a single package, driving 3 mm x 3 mm OptiMOSā„¢ 6 40 V/1.5 mā„¦ external power MOSFETs.

Ā The board supports the development of battery-operated products that use a brushless dc or permanent magnet synchronous motor. This motor controller solution is notable for its high efficiency, small size, and low component count.Ā Ā 

Ā The EVAL_IMD700A_FOC_3SH can operate independently or with an Infineon motor control GUI. It operates at up to 300 W with no heat-sink required.

 

1 2 3 4 5 6 7