Industrial

Infineon

The EVK-MAYA-W381 from u-blox provides a ready-made application environment for designers working with the MAYA-W381, a module which is based on the CYW55513 Wi-Fi 6/Bluetooth wireless chipset from Infineon. The module provides two external antennas for tri-band Wi-Fi 6/6E and Bluetooth 6.0 connectivity. 

 

Key features of the EVK-MAYA-W381 include:  

  • SD card adapters to access the SDIO host interface
  • USB interface to easily access the Bluetooth UART interface via a USB-to-UART bridge
  • Digital and analog audio interfaces for Bluetooth wireless networks 
  • SMA connectors for external antennas
  • GPIO pins and other module interfaces accessible through pin headers
  • Multiple power-supply options
Infineon

Evaluation board, EVAL-6EDL04I065PR, features Infineon’s latest silicon-in-insulator (SOI) EiceDRVIER™ gate driver IC, 6EDL04I065PR, and TRENCHSTOP™ Reverse Conducting (RC) IGBT, IKD06N60RC2, in a compact, cost-effective three-phase inverter bridge designed to drive a brushless direct current (BLDC) motor.

Infineon

Infineon´s XENSIV™ TLx5012B magnetic angle sensor 2GO kit is a budget-priced entry level evaluation kit equipped with a TLE5012B /TLI5012B digital GMR angle sensor interfaced with an  XMC1100 Infineon Microcontroller based on ARM Cortex M0 CPU.

Nexperia

The Nexperia NEVB-MCTRL-100 BLDC motor driver kit provides a full motor drive solution for 12 V to 48 V, three-phase brushless dc (BLDC) motors. 

The kit features PCBs designed for the Nexperia NextPower MOSFET family housed in an LFPAK56 package, and the modular design allows for different motor controllers, gate drivers, MOSFETs and motors to be used. In addition, each board provides convenient test points for power, motor drive, and sensing signals to aid with development and testing with the Nexperia LFPAK56 MOSFET family. 

The motor controller board is compatible with the Leonardo R3 and Nucleo development board form factors.

STMicroelectronics

The EVLSTGAP3S6S is a half-bridge evaluation board for evaluating the STGAP3S6S isolated single gate driver from STMicroelectronics.

The STGAP3S6S features a maximum 6 A current capability, rail-to-rail outputs, and optimized under-voltage lockout and desaturation protection thresholds for silicon carbide (SiC) MOSFETS. It is ideal for use in high-power industrial motor drivers.

The gate driver has a single Output pin and a driver line for an external Miller clamp N-channel MOSFET: this optimizes the suppression of positive and negative gate spikes during fast commutations in half-bridge topologies.

Device protection features are connected to the recommended network on the board and can be easily evaluated through the board test points. Dual Input pins allow the selection of signal-polarity control and hardware interlocking protection to avoid cross-conduction in case of controller malfunction.

The gate driver allows negative gate driving, and the onboard isolated dc-dc converters provide an optimized drive voltage for SiC MOSFETs.

STMicroelectronics

The EVSPIN32G02Q1S1 board from STMicroelectronics is a complete three-phase inverter design based on the STSPIN32G0251 controller, which integrates a three‑phase 250 V gate driver and an Arm® Cortex®-M0+-based STM32 microcontroller.

1 … 6 7 8 9 10 … 40